30 December 2021 | 1 min read

Adding Subnets to IPXO from APNIC

Learn how to add APNIC allocated subnets to the IPXO Marketplace.

IPXO is a fully automated IP address lease and monetization platform. To get the most out of it, make sure to get acquainted with the minimum requirements for listing APNIC-issued subnets. 

Check the subnet’s Whois information 

Make sure the inetnum you are adding exists in APNIC’s Whois database. You can use APNIC’s Whois Search tool to look this information up. Please make sure that the inetnum you are adding exists in Whois. 

Note: NIR resources, at the moment, are not acceptable. If you own APNIC resources through one of the NIRs, please contact us at [email protected] or via the IPXO Help Desk.

Check if the subnet’s status is accepted 

Not all subnet statuses are accepted in the IPXO Marketplace. Based on the Inetnum Status, perform the required action from the following table: 

Inetnum Status Action 
Allocated Portable Authorize by adding IPXO generated mnt-by 
Allocated Non-Portable Authorize by adding IPXO generated mnt-by 
Assigned Portable Unsupported 
Assigned Non-Portable Unsupported 
Legacy Unsupported 

Still need help?

Slack community

Get involved in the IPXO Slack community.

Ask the IPXO community

Contact support

If you have any questions, contact our support team!